|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Type: | Hook |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
| Products: | stainless steel turnbuckle/wire rope clip/shackle/thimble/eye bolt and eye nut/connector/hook/snap hook/quick link/block/chain/wire rope/anchor and some other stainless steel marine hardwares. |
| stainless steel marine hardware: anchor,cleat,deck hardware,bollard,chock,pipe fitting… | |
| Size: | regular size or as you required |
| Material: | stainlesss steel 304,316,316L,202 etc. |
| Type: | US Type,European Type,Japanese Type |
| Processing: | casting, cnc machining |
| Surface finish: | mirror polished |
| Standard: | DIN,JIS,BS etc. |
| Package: | PP bags,cartons or others as customers' requirements. |
| Service: | ODM and OEM are available and Sample is OK. |
1.A padeye is a device often found on boats that a line runs through, or provides an attachment point.
1. Marine-Grade 316 (A4) Stainless Steel
Superior Corrosion Resistance: 316 stainless steel, with its 2-3% Molybdenum content, offers exceptional resistance to pitting and crevice corrosion from saltwater, chlorides, and harsh marine atmospheres-far superior to 304 stainless.
Material Certification: All plates are sourced from certified mills with full Material Test Certificates (MTC) per ASTM A240/A240M, ensuring traceability of chemistry (C, Cr, Ni, Mo) and mechanical properties.
Form & Finish: Precision laser-cut or waterjet-cut from plate stock, with edges beveled for full-penetration welding and surfaces finished to a smooth #4 brushed or polished finish to minimize fouling and ease cleaning.
2. Optimized Structural Design
Reinforced Geometry: Designs feature thickened sections around the pinhole and generous fillet radii to eliminate stress concentrations, based on Finite Element Analysis (FEA) optimization.
Standard & Custom Designs:
Single Lug / Pad Eye: Standard design with one pinhole.
Double Lug / Twin Plate: For balanced, two-legged lifts.
Cheek Plate / Reinforced Lug: With gussets or side plates for extreme loads or dynamic applications.
Custom Geometries: Engineered to your specific load case, space constraints, and welding requirements.
Pin Hole Machining: The load-bearing pinhole is precision reamed or bored to a tight tolerance (H9 or H8) and a fine surface finish, ensuring proper fit with shackle pins and preventing galling.
3. Welding & Integration Ready
Weld Preparation: All edges to be welded are provided with a clean, consistent bevel (e.g., 30°-45°) to facilitate Full Penetration Groove Welds (FPG) as per AWS D1.6 Structural Welding Code - Stainless Steel.
Alignment & Fit-Up: Plates are manufactured with high dimensional accuracy to ensure proper fit-up on curved or complex structures.
Welding Consumable Guidance: We can recommend matching 316L grade welding wire/electrodes to preserve corrosion resistance in the weld zone.

Shipbuilding & Repair: Lifting points for engine blocks, propellers, lifeboats, hull sections, and modular components during construction and dry-docking.
Offshore Oil & Gas: Padeyes for crane lifts, module handling, mooring attachments, and personnel transfer systems on platforms, FPSOs, and rigs.
Naval Vessels: Weapons handling, cargo securing, and special operations equipment mounting points.
Port & Harbor Infrastructure: Permanent lifting attachments on cranes, docks, buoys, and wave energy converters.
Sailboat & Yacht Rigging: Heavy-duty deck plates for mast steps, genoa track cars, and mainsheet systems.
Raw Material: 100% verified MTCs with spectrographic analysis backup.
Dimensional Control: CMM or laser scanning verification of critical dimensions, especially pinhole diameter, location, and parallelism.
Non-Destructive Testing (NDT): Dye Penetrant Testing (DPT) on 100% of finished plates to detect surface cracks. Ultrasonic Testing (UT) available for thicker sections.
Load Testing: Prototype or sample plates can be destructively tested to validate FEA calculations and confirm the MBL.
Full Documentation: Dossiers include material certs, inspection reports, welding procedure recommendations, and as-built drawings.
All our Stainless Steel Rigging Products are in good stainless steel quality.
1. Standards: all Rigging Hardware Products are made as per the international standards.
2. Types of products: we are a specializing hardware rigging manufacturer and exporter of turnbuckle, shackle,thimble, hook, clamp, chain, snap hook, quick link, eye bolt & eye nut, anchor, block, winch, wire rope and so on.
3. Equipments: Our factory owns equipments including of friction and punch machines, saw, milling, planer, grinding, tapping, oil pressing machines, test machines, heat treatment and polishing machines.
4. Quality control: Our well equipped physical-chemical test center forms the quality control system, which guarantees the quality from material to the finished products.
| We are able to design according to your requirements,produce according to your drawings or samples. | |
| Any problems,please feel free to contact us. | |
| Our products: rigging hardware & marine hardware. | |
| Our principle:reliable quality,competitive price,prompt delivery. | |
| Our service:any mail & enquiry will be replied within 2 working days. | |
| We warmly welcome customers from all over the world. |
1. Q: Why choose Shengao product?
